Purtroppo, questa descrizione non è stato tradotto in italiano, in modo da trovare a questo punto una descrizione inglese.
Pixel Timer Remote Control TC-252/N3 for Canon
The Pixel TC-252/N3 Timer Remote Control is suitable for various Canon cameras and gives you the ability to control your camera from a distance. The TC-252/N3 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TC-252/N3 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TC-252/N3. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop.
The 2 AAA batteries have a standby time of up to 3 years.
The N3 cable is suitable for the following Canon cameras:
Canon: EOS 7Dseries, 5Dseries, 1Dseries, 6D, 60D, 40D, 30D, 20D, 10D
The TC-252/N3 can be used with various other cameras through the use of a connection cable. Such connection cables can be found in the optional accessories tab below or alternatively, you can find the cable suitable for your camera here: Connection Plugs
Included:
- Timer Remote Control TC-252/N3 for Canon
- Connectioncable
- 2 AAA Batteries
- Manual
