Helaas is deze beschrijving nog niet in het Nederlands vertaald. U vindt hier dus een Engelse artikelbeschrijving.
Riflescope Nachtfalke 2,5 - 10x56 Gen II - for the night hunt by DDoptics
The new light intensive riflescope Nachtfalke HDXtreme 2,5 - 10x56 Gen II of the second generation is perfectly suited for the practical challenges of the night and hide hunt.
Highlights:
- reticle adjustment: 1/4 click
- absolute repetition accuracy
- extreme light transmission of up to 94,7%
- IFiber control optional
- shooting stability: 375H&H Magnum with over 1000 shots
- steplessly adjustable parallax compensation
- reticle 4
- Gen II is continued even with Gen III availablereticle
Uncompromising and powerful
The Nachtfalke 2.5-10x56 is the result of a development that had as its goal the creation of an effective riflescope with great light transmitting capacity for adverse lighting conditions and for use in twilight and at night. The reflection-free optics provide extremely bright, high-contrast images with well-balanced colour and exceptional edge definition. Thanks to its robust construction combined with a top-quality illumination dot that can be used with night vision devices and in backlight the Nachtfalke 2.5-10x56 is the perfect allround riflescope for precise shooting in the dark.
Maximum light transmission for hide and night hunt
The fully-coated lenses completely eliminate reflections, resulting in a super-bright image and exceptional edge definition qualities. Thanks to the minimal flare light component even backlight is not a problem. Peak light transmission values of 94.7% (day) and 93% (night) ensure a successful response up to the last hunting light.
Finely dimmable illumination dot (IFiber automatics available)
Thanks to fibre-optic technology, the illumination dot becomes both darker and more delicate when strongly dimmed. The illumination dot can be dimmed steplessly to suit conditions ranging from backlight to night vision mode.
High-quality illuminated reticle in the 2nd image plane
The illuminated reticle 4 is located in the ocular image plane (2nd focal plane), so the reticle size remains fixed at all magnifications. No aids are required to adjust the reticle. With each click the reticle moves 0.25 MOA (minutes of angle), which translates to 7.3 millimetres per 100 metres. The click adjustment offers absolute repeatable accuracy and can be reset to zero after testing (in case several different ammunitions and loads are used).
Total adjustment range:
355 clicks
equivalent to 88.75 MOA
equivalent to 44.37 MOA per side
The steplessly adjustable lateral parallax adjustment (20 yards to infinity) prevents parallax errors and also guarantees a razor-sharp, effortless image at any magnification.
Recommended use:
These scopes were developed for European hide hunting at night. We have eliminated everything that is not needed at night. The magnification was limited to 10x in order to achieve a better lateral insight. The parallax compensation can be used to adjust sharpness if a night vision device is used. (hunting abroad)
Now bundle offers are possible:
Startinmg now this riflescope is available in a bundle offer with the DENTLER mounting base.
You can also get our riflescope with a high-quality ceramics coating. Here we also offer a low priced bundle packet. Attention: The ceramics coating is an elaborate individualisation of your riflescope. Thus the delivery period can be up to four weeks (after ordering)!
Easy upgrading with the new IFiber illumination dot possible!
What are the advantages of the new DDoptics IFiber technology?
More comfort and safety without having to adjust. The illumination dot is as easy to activate as ever. Simply turn the knob to steplessly adjust the illuminated fibre-optic dot to the desired brightness. That's it! Your new, intelligent IFiber will do the rest.
Your movement activates your illumination dot. (Motion-Control)
A highly modern position and movement sensor registers every movement and trhe position of the optics. A controller interprets this data so that the illumination dot can be wherever it is needed.. That way a maximum of power is economized.
Up- and downhill feature (Angle-Control)
If you exceed the shot angle of 45 degrees (higher or lower) the illumination dot checks if you are shooting up- or downhill. If you don't get back to a normal shooting position after a few minutes the illumination dot changes to rest and transport mode.
The transport mode (Position-Control and Angle-Control)
During transport mode (hanging over the shoulder or lying on the side) the illumination dot isn't activated by movement. Once you bring the optics in a normal shooting position the IFiber Controller reacts to movement again. A short tug or tilting will activate the illumination dot again in the preadjusted brightness (IFiber-Memory-Control).
How does IFiber work:
The logical answer is: state-of-the-art micro technology. The new illumination dot controller has been equipped with state-of-the-art micro technology. An ultra-modern position and motion sensor registers every movement as well as the position of the optics. This information is interpreted by a controller to make sure the illumination dot is available when you need it, while at the same time saving the maximum amount of energy. This control has an energy consumption which isn't higher than the self-discharge of your battery.
IFiber-BLP (Battery Longevity Protection)
If the IFiber doesn't notice any activities during more than three hours the electronics can turn off itself and the light-emitting diode completely. Thus the controller enables total battery protection. After turning off it can't be activated without your help. In that condition the your battery is protected as best as possible against discharging by a consumer (Controller, light).
Restart via reset
To restart the illumination dot just turn the on/off control back to position zero for two seconds. After that, you can use the illumination dot again as usual.
