PrimaLuceLab has created the most advanced all-in-one computer for telescopes and astrophotography with the new EAGLE6. Discover the next level of remote control and power for your astrophotography equipment - with GPS, EYE brightness sensor and DARK mode, as well as enormous storage capacity.
Housed in a unique PLUS aluminium case, the EAGLE6 features a powerful Windows 11 Enterprise operating system, fast SSD storage, 10 USB ports, an advanced power distribution system, specialised WiFi 6 network for wireless control of your telescope, GPS sensor with high-gain antenna for automatic position and time detection, EYE sensor for measuring sky brightness, DARK mode and much more.
Replace your normal laptop or desktop with the EAGLE, saving you a lot of time so you can spend more time observing! Since the EAGLE6 is a Windows 11 computer, you can continue to use all your instruments and software, but enjoy many advantages that you don't have with a normal computer. PrimaLuceLab's engineers have designed the EAGLE6 as an "all-in-one" solution for any telescope. When all data and power cables are connected to the EAGLE, the telescope can move freely and offers optimal cable management without the risk of cable tension. All you need is a power supply via battery or power pack.
Don't let anyone else decide which instrument you can use for astrophotography, because you are the observatory director! By using a powerful Windows 11 Enterprise computer (which is 100% compatible with all software and drivers for Windows 11 64-bit), the EAGLE will work seamlessly with all your instruments (which of course have Windows 11 64-bit drivers) and Windows 11 software. The built-in SSD hard drive (faster and more durable than normal HDD hard drives) allows you to store the recorded data directly on the EAGLE. Alternatively, a USB 3.0 flash drive can be connected to one of the high-speed USB 3.0 ports.
Compatible with any telescope: Mount the EAGLE on telescopes of all types!
Thanks to the innovative PLUS housing, you can mount the EAGLE on telescopes of all types: refractors, Schmidt-Cassegrains, Ritchey-Chrétiens, Newtons and more. With the numerous threaded holes on the EAGLE's housing and the availability of various PLUS system extensions (tube clamps, prism rails, prism brackets), it is easy to attach the EAGLE securely to your telescope setup. Compared to a normal laptop, you will have significantly fewer cables of shorter length that move with the telescope (this reduces the risk of cable tension or plugs falling out while the telescope is panning across the sky). The EAGLE is characterised by low power consumption, which significantly reduces the battery capacity required for the entire night. All electronic components are designed to operate in the field over an extended temperature range. This means you can rely on the EAGLE all night long, even in high humidity, as the waste heat from the computer provides just enough heat to prevent condensation on the housing or the EYE sensor.
