✓ 7,500+ items available from stock
✓ Personal advice & service
Get closer
Astronomy > Telescope accessories > Astrophotography > Masks > Flatfield Masks > Wanderer Astro > Basic > Wanderer Astro Flat field mask 100mm V5 Basic
Product no.: 102318

Flat field mask 100mm V5 Basic

$ 319.00 incl. VAT plus shipping costs
too expensive?
short-term
ready for shipping in 1-2 weeks + lead time
Notice on the legal guarantee of conformity
  • Motorised Flatfield illuminator with dust cover

Product description

The WandererAstro WandererCover V5 Basic combines a motorised dust cover with an integrated Flatfield illuminator.

At its heart is the patented LED backlight design. Unlike conventional edge-lit Flatfield illuminators, a full-surface LED circuit board is connected directly to the motor arm. In combination with an air gap and a diffusion layer, this produces particularly uniform illumination. According to the manufacturer, the brightness variation between the centre and the edge is typically only around 5 per cent.

Precise Flatfield images with 255 brightness levels

The integrated LED lighting offers 255 continuously adjustable brightness levels and operates flicker-free even at very short exposure times down to 0.05 seconds. With a brightness range of 18 to 2,280 cd/m² and a broad spectrum from 400 to over 720 nm, the WandererCover V5 Basic is suitable for both classic LRGB imaging and narrow-band photography.

Intelligent motor control and maximum freedom of movement

The powerful motor opens and closes the cover in just around eight seconds. With an opening angle of over 270°, the cover can be folded back completely and positioned close to the telescope tube.

An integrated obstacle detection system provides additional safety: if an obstacle is detected during opening or closing, the motor stops automatically. This reduces the risk of damage to the camera, the optical tube or other components.

Particularly lightweight and Modular in design

Thanks to the innovative design, in which the LED circuit board also acts as a load-bearing element, the weight has been reduced by around 30 per cent compared with conventional edge-lit Flatfield systems.

The WandererCover V5 Basic is available in seven sizes with illumination diameters ranging from 100 to 250 mm. Thanks to its Modular design, the Flatfield panel can be swapped for a different size when changing telescopes, without having to replace the entire motor unit.

Seamless integration into astrophotography

The controls are compatible with the established ASCOM and INDI standards . Furthermore, the WandererCover V5 Basic is natively supported by Sky-Watcher SynLink.

The additional AUX connection also allows for convenient control via the power switching outputs of ZWO ASIAIR or StellaVita.

Disturbing status LEDs have been deliberately omitted so as not to impair dark adaptation during astrophotography. Furthermore, the Flatfield lighting is automatically deactivated when the cover is open.

The WandererCover V5 Basic is therefore a well-designed solution for astrophotographers who value precise Flatfield calibration, low weight and a high degree of automation.

Guidance on selecting the correct size

The aperture diameter of the telescope alone is not the only factor in selecting the correct model. The outer diameter of the telescope aperture, including the dew shield, is the decisive factor.

The illuminating diameter should be at least equal to the outer diameter of the dew shield. Please also note that the actual outer diameter of the panel is 25 mm greater than the specified illuminating diameter.

Contents of delivery:

  • WandererCover V5 Basic in the selected size
  • 1 × USB 2.0 cable (1 m)
  • 1 × DC5521 power supply cable (1 m)
  • 4 × nylon cable ties

LED backlight technology

Compatible with ASCOM, INDI, Sky-Watcher SynLink

Image for illustrative purposes only: The product image shows an example of one size from this product range. The size specified in the product description or technical specifications will, of course, be supplied.

Specifications

Capacity


Light area diameter (mm)
100
Input voltage
12
Amperage (A)
0,8
Battery-powered
no
Cable length (m)
1
Anti-fog heating
no
Spectral Range (nm)
400-720

Special features


Controllable via PC
yes (ASCOM, INDI, Sky-Watcher SynLink)

Equipment


Dimmer
yes
Cable
USB
Carry case
no
Motor-powered
yes
Remote control
no
Power pack
no

General


Type
Masks
Type of build
flat field mask
Series
Basic
Diametre on the outside (mm)
125
Weight (g)
265
Material
Aluminium alloy, carbon fibre, fibreglass

Product safety

Manufacturer: Shanghai Yewan Instrument Equipment Co., Ltd, CN
Responsible person: Artesky SRL, Via IV Novembre, 103 , 20883 Giussano (MB), [email protected]
Wanderer Astro Flat field mask 100mm V5 Basic
Wanderer Astro Flat field mask 100mm V5 Basic
Wanderer Astro Flat field mask 100mm V5 Basic
Wanderer Astro Flat field mask 100mm V5 Basic

Customer reviews

There are no customer reviews for this product yet.

Compose your own review

Do you have specific questions about your order or products? Please contact our customer service!

Compare 0/4