Clip filters for Canon EOS R and RP full-frame mirrorless cameras: The clip filters can be quickly and easily mounted in the camera body without tools. The filter can be inserted or removed at any time, even on the go or at night. No modification to the body is required to use the clip filters. Removal is done with a small hook, which is included in the scope of delivery.
Compatible Canon EOS cameras: Canon EOS R, Canon EOS Ra, Canon EOS RP, Canon EOS R3, Canon EOS R5, Canon EOS R5 Mark II, Canon EOS R6, Canon EOS R6 Mark II, Canon EOS R8, Canon EOS R7, Canon EOS R10
NOT compatible with these camera lenses: Canon RF 35mm f/1.8 IS MACRO, Canon RF 85mm f1.2 L USM, Extender RF 2x, Extender RF 1.4x, Canon RF-S
Please note: These clip-on filters are NOT compatible with this lens: Canon RF 35mm f/1.8 IS MACRO
This filter is not an astronomical filter in the classic sense! Rather, it is designed to enable converted DSLR CCD and CMOS cameras, in which the built-in IR filter has been removed or replaced by a modified IR filter, to be used again for terrestrial photography.
The OWB (Original White Balance) filter shifts the entire spectral range of the converted DSLR camera so that it can be used again for terrestrial photography without restriction. This eliminates the decision to use a camera exclusively for astrophotography, which can be quite expensive!
How it works: The OWB filter has been so carefully calculated and designed that the images from the converted DSLR camera once again deliver results that correspond to the human eye's perception of daylight. This enables the camera to work with the sizes it is familiar with for the various preset white balance values and, of course, with automatic white balance (AWB). This was not possible with converted DSLR cameras without a filter.
