The hunting longrange riflescope by DDoptics 5-30x50 Gen. III
Hunting precision on long distances and hunting design
The Nachtfalke 5-30x50 hunting riflescope is a high-performance rifle scope with 6x zoom and innovative technology. With its robust, 2mm thick frame walls these optics even exceed military standards. The small, discreet reticle adjustment turrets are made of aluminium alloy and do not contain any plastic parts. The hunting version of the tactical riflescope has the same well-defined, precise, firm T-click adjustment and thus guarantees absolute precision and repeatable accuracy.
High magnifications with less light
The hunt in large field terrain demands a lot of the riflescope. High magnification makes safe targeting possible even on large distances, but it is important to have usable image luminosity even under high magnification. The 5-30x50 hunting riflescope was created especially for this purpose. The discreet hunting design conceals the capacity of this riflescope. The small reticle adjustment towers don't fall behind the bigger tactical adjustment towers.
Optical performance
The extra elaborate HD optics offers a colour accurate image rich in contrasts and with excellent ridge acuity properties due to a specially developed coating which doesn't allow any reflexes or stray light even with 30x magnification. The colour ridges could be reduced to a minimum. That way the Nachtfalke 5-30x50 Tactical can also be used as a spotting scope and to safely target on long distances.
Hunting A4N illuminated reticle
The riflescope Nachtfalke 5-30x50 - A4N has the succesful, modern reticle 4 N.
New reticle 4N for minimal target blocking
Looking through the new riflescope generation III the user immediately notices the practice-oriented design: The crosshairs of the reticle 4N are a lot more delicate and the slightly thicker outer bars are now only half as thick und thus noticeably farther apart. A big advantage for the hunter especially during bad light conditions as it covers the target only minimally and thus a safe and rapid shot is ideally supported.
The reticle is on the ocular plane (2nd image plane). That way it always stays the same size during change of magnification. Even under 30x magnification the crosshairs only cover 3,91mm on a distance of 100m and the field of view under this maximum magnification still is 1,1m on 100m. The riflescope allows for lightning fast targeting. The reticle adjusts 1/8 MOA (minute of angle) per click, equalling 3,65mm on 100m. This translates to a impact position change of about 10mm per click on 300m.
Easy upgrading with the new IFiber illumination dot possible!
What are the advantages of the new DDoptics IFiber technology?
More comfort and safety without having to adjust. The illumination dot is as easy to activate as ever. Simply turn the knob to steplessly adjust the illuminated fibre-optic dot to the desired brightness. That's it! Your new, intelligent IFiber will do the rest.
Your movement activates your illumination dot. (Motion-Control)
A highly modern position and movement sensor registers every movement and trhe position of the optics. A controller interprets this data so that the illumination dot can be wherever it is needed.. That way a maximum of power is economized.
Up- and downhill feature (Angle-Control)
If you exceed the shot angle of 45 degrees (higher or lower) the illumination dot checks if you are shooting up- or downhill. If you don't get back to a normal shooting position after a few minutes the illumination dot changes to rest and transport mode.
The transport mode (Position-Control and Angle-Control)
During transport mode (hanging over the shoulder or lying on the side) the illumination dot isn't activated by movement. Once you bring the optics in a normal shooting position the IFiber Controller reacts to movement again. A short tug or tilting will activate the illumination dot again in the preadjusted brightness (IFiber-Memory-Control).
How does IFiber work:
The logical answer is: state-of-the-art micro technology. The new illumination dot controller has been equipped with state-of-the-art micro technology. An ultra-modern position and motion sensor registers every movement as well as the position of the optics. This information is interpreted by a controller to make sure the illumination dot is available when you need it, while at the same time saving the maximum amount of energy. This control has an energy consumption which isn't higher than the self-discharge of your battery.
IFiber-BLP (Battery Longevity Protection)
If the IFiber doesn't notice any activities during more than three hours the electronics can turn off itself and the light-emitting diode completely. Thus the controller enables total battery protection. After turning off it can't be activated without your help. In that condition the your battery is protected as best as possible against discharging by a consumer (Controller, light).
Restart via reset
To restart the illumination dot just turn the on/off control back to position zero for two seconds. After that, you can use the illumination dot again as usual.
