Maximum precision and reliability, Nighteagle 3rd generation Tactical riflescopes
DDoptics Riflescopes – Engineered in Germany, made in Japan and finally assembled in Germany.
DDoptics 3rd generation Tactical Riflescopes are manufactured to the tightest tolerances. For hunting rifle scopes, we have switched to the precise reticle adjustment of the Tactical series. Returning to the default setting at the ZERO position can be quickly achieved by presetting the zero stop. Centring error during zooming has been virtually eliminated. We use high-performance CT (Clear Transmission) glass with the proven DDlucid coating, which improves contrast and reduces colour fringing.
Nighteagle Tactical V6 5-30x50 Long Range MilDot
- CT glass (Clear Transmission)
- Zerostop (for zeroing)
- Doubleturn (double scale)
- Horizontal adjustment with opposite scales (wind left – right)
- Very high resolution
- MRAD adjustment 1 cm at 100 m
- Accessories: 1x flip caps, cleaning cloth, DDoptics chip, target discs, scope manual, ballistics kit
Tactical Mildot illuminated reticle on the 2nd image plane
The Nighteagle V6 5-30x50 Tactical riflescope features a Mildot reticle standardised for 10x magnification in the eyepiece image plane (2nd image plane), ensuring it remains the same size when changing magnification. Even at 30x magnification, the reticle covers only 1.8 mm of the target at a shooting distance of 100 m, and the field of view at this maximum magnification is still 1.1 m at 100 m. The scope allows for lightning-fast targeting. The reticle adjusts by 0.1 MRAD per click, i.e. by 1 cm at 100 m. At 300 m, this corresponds to a change in point of impact of around 3 cm per click.
Total adjustment range: 165 clicks – 16.5 MRAD (8.25 MRAD per side)
Riflescope with quick-adjustment & zero-stop
On the vertical adjustment, a dual scale allows the number of clicks made to be read and set. After zeroing, the reticle adjustment can be ‘reset to zero’ by releasing the turret lock with a coin or a screwdriver. The zero setting is then locked in place from below using the zero stop to achieve a stop at the zero position. Starting from the zero position, various shooting distances can be preset using a marking system.
Horizontal adjustment with counter-rotating scales
The lateral adjustment is marked with two opposing scales. Starting from the zero setting, the wind direction and wind strength, or any movement of the target, can be preset here.
Zero stop
Returning to the riflescope’s default setting at the ZERO position can be quickly achieved by presetting the Zerostop. Only with Zerostop does marking additional shooting distances really make sense.
Zero Stop features
- Ideal for marking different shooting distances
- easier and more user-friendly; clicks are more clearly audible
- Hard-click adjustment
- Double-turn with Zerostop
The best red dot for backlighting / twilight / night vision
The fibre-optic reticle (also available in the automatic IFiber version at extra cost) is kept so small that it causes only the minimum possible obstruction of the target. Thanks to fibre-optic technology, the reticle of the riflescope becomes not only darker but also finer when dimmed significantly. The reticle can be dimmed continuously by 100% until it can no longer be perceived by the human eye. Below level 4, the reticle is only visible with a night vision device. When the reticle illumination is switched off, the full-length reticle appears as it would on a riflescope without a reticle illumination unit and is not interrupted by a distracting, freestanding dot. When the reticle illumination is activated, however, there is no annoying glare or reflections within the optics.
