With a reduction adapter, you can connect accessories with smaller thread sizes to the telescope.
This adaptors is screwed directly into the female M68x1 thread of the focusers and offers a female M48x0.75 thread on the camera side. You can use this female thread to connect coma correctors with an attached M48 thread, for example, or to create your own customised adaptation.
This adaptor is extremely short because the adaptor practically disappears completely into the M68 connection thread of the focuser.
The adapter fits the following focusers and adaptors, among others:
- MoonLite 2.5" focusers with D=68 mm internal thread
- TS Optics focusers TSFOCR30 and TSFOCR30S and RPA25
- All adaptors with female M68x1 thread
The adaptors are especially suitable for:
- Coma correctors from Baader with attached M48 thread (MPCC and RCC). You screw the corrector with the M48 thread into the adaptors and can connect the camera with the T2 thread. Everything is now completely screwed together.
- TSFLAT2 TS flattener for refractors.
- With the TS Optics M48 inverting ring you can turn the female M48 thread into a male thread - either on one side only or on both sides.
TS Optics is a brand of Teleskop-Service.
